The working principle of a DC generator is to convert the alternating electromotive force induced in the armature coil into a direct current electromotive force when it is led out from the brush...

In order to ensure the normal operation of high-voltage motors, in addition to using them according to operating procedures and paying attention to normal monitoring and maintenance during...

Ordinary motors are designed based on constant frequency and voltage, and cannot fully meet the requirements of frequency converter speed regulation. Therefore, they cannot be used as variable ...

A starter with a gear reducer installed between the armature shaft of the starter and the driving gear is called a decelerating starter.

In general, the generator rear cover or rear cover dust cover will be marked with symbols of each outgoing terminal. The nature of the terminal can be judged according to the marking symbol, and the c

The structure of ordinary alternator is composed of rotor, stator, brush and brush holder, rectifier, fan, pulley, front and rear end covers, etc.

working principleThe working principle of the overall alternator　　When the external circuit energizes the field winding ...

Dear customers and friends:Hello!May Day is approaching. According to national regulations and combined with our company...

The spring breeze is about to ring the auspicious bell, and we will place new hopes on the resonance of the same frequen...

On September 4, 2019, Zhejiang Kesida Automobile Motor Co...